Repositório Colecção: Textos completos em actas de encontros científicos nacionais com arbitragemTextos completos em actas de encontros científicos nacionais com arbitragemhttps://hdl.handle.net/1822/37232024-03-28T08:53:52Z2024-03-28T08:53:52ZCircularity micro-indicators applied to plastic parts: the materials perspectiveMatos, JoanaSimões, Ricardo João FerreiraMartins, Carla I.https://hdl.handle.net/1822/872402023-11-27T09:12:43Z2023-11-15T08:43:27ZTítulo: Circularity micro-indicators applied to plastic parts: the materials perspective
Autor: Matos, Joana; Simões, Ricardo João Ferreira; Martins, Carla I.
Resumo: The use of polymeric materials has increased exponentially in recent decades in all application areas. However, currently, most plastic products are designed and manufactured without careful consideration of their end-of-life management. As a result, the generated waste presents a large diversity of different polymers (often including harmful additives), which are discharged in landfills, posing problems for sustainable and environmentally friendly waste management, and draining valuable finite resources.
Thus, it is urgent to change the plastic sector regarding the way products are conceived, and to promote, through strategies of the circular economy, the recovery of plastic materials to produce new products.
To make this possible, there is a need to inform plastic manufacturers about circular economy concepts and provide knowledge and tools that allow them to measure the circularity of their products. In recent years, circularity micro-indicators have been proposed as a type of tool addressing this issue; however, they vary in scope, breadth, and the perspective they take on the overall life cycle of the product. Additionally, among the plethora of such circularity micro-indicators, the materials used in the product and how the material is handled at the end-of-life stage are only relevant in some cases.
As such, this paper aims to identify circular micro-indicators that are relevant to plastic products and consider the origin of their polymeric materials (virgin, recycled, biodegradable, compostable, or derived from renewable sources) for evaluating product circularity. Within the scope of decision making, these circularity micro-indicators can help project development teams to determine if the selected materials contribute to overall product sustainability. In addition, we identify—from the materials perspective—some guidelines and good practices that help maximize product circularity and accelerate the implementation of the circular economy in the plastics sector.
<b>Tipo</b>: conferencePaper2023-11-15T08:43:27ZMicroinjection of polipropylene with nanoclaysCunha, A. C.Pontes, A. J.https://hdl.handle.net/1822/355742018-07-17T14:39:39Z2015-06-15T10:28:05ZTítulo: Microinjection of polipropylene with nanoclays
Autor: Cunha, A. C.; Pontes, A. J.
Resumo: Polypropylene (PP)/montmorillonite (MMT) nanocomposites micro samples was produced
by micro injection molding at concentrations 2, 6 and 10% of Nanomax. The dispersion of the nanoclay particles
in polypropylene was characterized using optical microscopy in polarized light, X-ray diffraction (XRD)
and Scanning Electron Microscopy (SEM) and the mechanical characterisation was performed using the tensile
test.
The results of x-ray diffraction indicated the formation of nanocomposites with partially exfoliated or intercalated
structures, depending on the concentration of clay, with a maximum basal spacing of 6.217 nm. The micrographs
obtained by scanning electron microscopy of fractured nanocomposite showed good dispersion of
clay in polymer matrix without the presence of clusters. The tensile strength of PP/MMT is not much improved
compared with pure PP but deformation increased significantly.
<b>Tipo</b>: conferencePaper2015-06-15T10:28:05ZFlow balancing in extrusion dies for complex geometry profilesGonçalves, N. D.Carneiro, O. S.Nóbrega, J. M.https://hdl.handle.net/1822/203872018-07-17T14:26:06Z2012-10-04T16:15:31ZTítulo: Flow balancing in extrusion dies for complex geometry profiles
Autor: Gonçalves, N. D.; Carneiro, O. S.; Nóbrega, J. M.
Resumo: This work describes a numerical code, able to deal with unstructured meshes, developed to solve the Navier-Stokes equations, and its employment to aid the design of an extrusion die used on the production of a complex cross section profile
<b>Tipo</b>: conferencePaper2012-10-04T16:15:31ZDesenvolvimento de dispositivos médicos: vantagens de uma metodologia dedicadaSantos, Isa C. T.Gazelle, G. ScottRocha, Luís A.Tavares, João Manuel R. S.https://hdl.handle.net/1822/146722018-07-17T09:55:37Z2011-11-30T11:31:35ZTítulo: Desenvolvimento de dispositivos médicos: vantagens de uma metodologia dedicada
Autor: Santos, Isa C. T.; Gazelle, G. Scott; Rocha, Luís A.; Tavares, João Manuel R. S.
Resumo: No que diz respeito a complexidade, o sector dos dispositivos médicos é semelhante ao da indústria aeronáutica ou nuclear. Para tal, contribuiu a abrangência da definição do termo ‘dispositivos médicos’, a multiplicidade de regulamentos, directivas e normas e também a natureza da relação entre produtores e utilizadores. Neste contexto, a incerteza associada ao desenvolvimento de novos produtos e/ou serviços é elevada justificando a aplicação de metodologias dedicadas eficientes. De um modo geral, a utilização de métodos apropriados para o desenvolvimento de produtos permite reduzir a duração das tarefas, optimizar os recursos existentes e obter produtos de qualidade superior que satisfazem os utilizadores e, consequentemente, conduzem a lucros acrescidos para os seus produtores. No que diz respeito a dispositivos médicos, crê-se que a utilização de uma metodologia dedicada é essencial para ultrapassar as dificuldades impostas pela complexidade da indústria e até ganhar competitividade. O processo de desenvolvimento de produto envolve as seguintes etapas: identificação de uma oportunidade, voz do cliente, desenvolvimento de conceitos, design, teste e validação e lançamento. Neste artigo, as especificidades dos dispositivos médicos são identificadas e a legislação relevante é revista. Tendo em atenção a informação recolhida, é sugerida uma metodologia de desenvolvimento de produto dedicada aos dispositivos médicos na qual se dá especial atenção às primeiras etapas por ser durante essa altura que são tomadas decisões que afectam não só o desenvolvimento do produto / serviço mas também o seu preço e a aceitação pelos utilizadores.
<b>Tipo</b>: conferencePaper2011-11-30T11:31:35Z