| Data | Título | Autor(es) | Tipo | Acesso |
| 2021 | Experimental study of PLA thermal behavior during fused filament fabrication | Vanaei, Hamid Reza; Shirinbayan, Mohammadali; Costa, Sidonie Fernandes, et al. | Artigo | Acesso aberto |
| Nov-2023 | Transmission laser welding of thermoplastics: influence of welding parameters and rib dimensions on the strength of welded joints | Bastos, Lourenço; Alves, Marco; Sousa, Bruno, et al. | Artigo | Acesso aberto |
| Dez-2022 | Effect of polymer type on the properties of polypropylene composites with high loads of spent coffee grounds | Marques, Mariana; Gonçalves, Luís Filipe Fernandes Ferreira; Martins, Carla I., et al. | Artigo | Acesso aberto |
| 2022 | Improving the thickness distribution of parts with hybrid thermoforming | Duarte, F. M.; Ribeiro, Catarina G.; Ferreira, João G., et al. | Artigo | Acesso aberto |
| 29-Mar-2022 | Predicting the effect of build orientation and process temperatures on the performance of parts made by fused filament fabrication | Duarte, F. M.; Covas, J. A.; Costa, Sidonie Fernandes da | Artigo | Acesso aberto |
| 2021 | Computer aided definition of the printing conditions of parts made by FFF | Costa, Sidonie F.; Duarte, F. M.; Covas, J. A. | Artigo | Acesso aberto |
| Abr-2021 | Evaluation of active heat sinks design under forced convection—effect of geometric and boundary parameters | Silva, Eva C.; Sampaio, Álvaro M.; Pontes, A. J. | Artigo | Acesso aberto |
| Abr-2021 | Assessment of the dimensional and geometric precision of micro-details produced by material jetting | Silva, Miguel R.; Pereira, António M.; Sampaio, Álvaro M., et al. | Artigo | Acesso aberto |
| 2015 | Morphology evolution during manufacture and extrusion of polypropylene/graphite nanoplates vomposites | Rodrigues, P.; Santos, R. M.; Paiva, M. C., et al. | Artigo em ata de conferência | Acesso restrito autor |
| 2017 | Melt mixing functionalized graphite nanoplates into PC/SAN blends | Paiva, M. C.; Cunha, E. P.; Voigt, O., et al. | Artigo em ata de conferência | Acesso restrito autor |
| 2017 | Methodology to select solutions for multiobjective optimization problems: Weighted stress function method | Ferreira, João Amaro Oliveira; Fonseca, Carlos M.; Denysiuk, Roman, et al. | Artigo | Acesso restrito UMinho |
| 2015 | Comment on “Determination of Nucleus Density in Semicrystalline Polymers from Nonisothermal Crystallization Curves” | Martins, J. A. | Editorial em revista | Acesso restrito UMinho |
| 2018 | High strength injection molded thermoplastic composites | Azenha, João José Almeida; Gomes, Marta; Silva, Pedro, et al. | Artigo | Acesso restrito UMinho |
| 2018 | Modeling and optimization of the injection-molding process: a review | Fernandes, Célio Bruno Pinto; Pontes, A. J.; Viana, J. C., et al. | Artigo | Acesso restrito UMinho |
| 2018 | Methodology for sustainable product design | Sampaio, Álvaro M.; Sousa, Ana M.; Simões, Paulo, et al. | Artigo | Acesso restrito UMinho |
| 2017 | Estimation of filament temperature and adhesion development in fused deposition techniques | Costa, S. F.; Duarte, F. M.; Covas, J. A. | Artigo | Acesso aberto |
| 2015 | Prediction of injection-moulded flax fibre reinforced polypropylene tensile properties through a micro-morphology analysis | Lafranche, Eric; Oliveira, Vania M.; Martins, Carla I., et al. | Artigo | Acesso restrito autor |
| 2016 | Thin wall injection-overmoulding of polyamide 6/polypropylene multilayer parts: influence of processing conditions on thermomechanical properties of the layer assembly | Macedo, Sandra; Lafranche, Eric; Martins, Carla I., et al. | Artigo | Acesso restrito autor |
| Mai-2017 | Biomedical films of graphene nanoribbons and nanoflakes with natural polymers | Silva, Magda Sofia Gonçalves; Caridade, Sofia Glória Ferreira; Vale, A. Catarina, et al. | Artigo | Acesso restrito UMinho |
| 9-Dez-2011 | Toward a physical definition of entanglements | Martins, J. A. | Artigo | Acesso restrito UMinho |
