Data | Título | Autor(es) | Tipo | Acesso |
19-Set-2018 | Mechanical joining methods for additive manufactured assembly tools | Pimentel, Anthony Michael Fernandes; Noversa, João Tiago Gomes; Freitas, Luís Miguel Capela Pereira Leite, et al. | Artigo em ata de conferência | Acesso aberto |
2020 | Mechanical, thermal and morphological characteristics of poly(methyl methacrylate) (PMMA) nanocomposites reinforced with Cu-Cr layered double hydroxide | Kumar, Manish; Rocha, Helena Cristina Lopes; Nunes, J. P., et al. | Artigo em ata de conferência | Acesso aberto |
2015 | Selection of solutions in multi-objective optimization: Decision making and robustness | Gaspar-Cunha, A.; Ferreira, J. C.; Covas, J. A., et al. | Artigo em ata de conferência | Acesso restrito UMinho |
2020 | Single screw extrusion optimization using the tchebycheff scalarization method | Rocha, Ana Maria A. C.; Matos, Marina A.; Costa, M. Fernanda P., et al. | Artigo em ata de conferência | Acesso aberto |
2013 | Effect of polymer melt wall slip on the flow balance of profile extrusion dies | Carneiro, O. S.; Ferrás, Luís Jorge Lima; Pinho, Fernando T., et al. | Artigo em ata de conferência | Acesso aberto |
2019 | Differential heating as a strategy for controlling the flow distribution in profile extrusion dies | Rajkumar, Ananth; Ferras, Luis L.; Fernandes, C., et al. | Artigo em ata de conferência | Acesso restrito UMinho |
2019 | Improving the numerical stability of steady-state differential viscoelastic flow solvers in OpenFOAM (R) | Fernandes, C.; Araujo, Manoel S. B.; Ferrás, Luís Jorge Lima, et al. | Artigo em ata de conferência | Acesso restrito UMinho |
2019 | In-process rheological measurements during the manufacture of multiphase polymer systems | Covas, J. A.; Teixeira, Paulo Francisco; Hilliou, L. | Artigo em ata de conferência | Acesso restrito UMinho |
29-Out-2018 | Run-time heterogeneous-aware power-adaptive scheduling in OpenFOAM | Ribeiro, Roberto; Santos, Luís Paulo; Nóbrega, J. M. | Artigo em ata de conferência | Acesso restrito UMinho |
2020 | Compression molding of pultruded carbon reinforced thermoplastic composites | Novo, P. J.; Nunes, J. P.; Silva, J. F., et al. | Artigo em ata de conferência | Acesso aberto |
19-Set-2018 | Comparative mechano-morphological studies on polyamide 6 based single polymer laminate composites prepared by different reactive processing techniques | Tohidi, Shafagh Dinparast; Rocha, Ana Maria; Dencheva, Nadya Vasileva, et al. | Artigo em ata de conferência | Acesso aberto |
20-Ago-2017 | Processing of carbon reinforced thermoplastic composites | Novo, P. J.; Nunes, J. P.; Silva, J. F., et al. | Artigo em ata de conferência | Acesso aberto |
2015 | Experimental assessment of Emitted Dose from Valved Holding Chamber devices | Oliveira, Ricardo Falcão; Silva, Manuel Viana; Machado, A. V., et al. | Artigo em ata de conferência | Acesso restrito autor |
2016 | VHC performance evaluation at constant flow: 30 L/MIN | Oliveira, Ricardo Falcão; Marques, Helena Maria Cabral; Machado, A. V., et al. | Artigo em ata de conferência | Acesso restrito autor |
2017 | How non-integer order derivatives can be useful to rheology | Ferrás, Luís Jorge Lima; Ford, Neville J.; Morgado, Maria Lusa, et al. | Artigo em ata de conferência | Acesso restrito autor |
2015 | Multi-objective optimization of gate location and processing conditions in injection molding using MOEAs: experimental assessment | Fernandes, Célio Bruno Pinto; Pontes, A. J.; Viana, J. C., et al. | Artigo em ata de conferência | Acesso aberto |
2017 | Development and experimental assessment of a numerical modelling code to aid the design of profile extrusion cooling tools | Carneiro, O. S.; Rajkumar, A.; Fernandes, C., et al. | Artigo em ata de conferência | Acesso aberto |
2017 | 3D printing of polypropylene using the fused filament fabrication technique | Silva, A. F.; Carneiro, O. S.; Gomes, R. | Artigo em ata de conferência | Acesso restrito UMinho |
5-Mai-2017 | Computer aided die design: A new open-source methodology | Carneiro, O. S.; Rajkumar, Ananth; Ferrás, Luís Jorge Lima, et al. | Artigo em ata de conferência | Acesso restrito autor |
2016 | Development of a new 3D openFOAM (R) solver to model the cooling stage in profile extrusion | Fernandes, Célio Bruno Pinto; Habla, F.; Carneiro, O. S., et al. | Artigo em ata de conferência | Acesso restrito autor |