Please use this identifier to cite or link to this item:

TitleIm2Cr: An efficient tool for crystallographic indexing of HR(S)TEM images
Author(s)Silva, André
Carbó-Argibay, Enrique
Proença, Alberto José
Stroppa, Daniel
Keywordssoftware tool
crystallographic indexing
nanostructured materials
Issue date2016
Abstract(s)Transmission Electron Microscopy (TEM) and Scanning TEM (STEM) have been widely used to characterize nanostructured materials with atomic resolution, and significant advances on their experimental setup greatly extended the current pool of analysis possibilities at the nanoscale. The exploration of advanced (S)TEM characterization capabilities and their reproducible application to reach a suitable sampling is often restricted by the extensive data analysis procedures required to reliably interpret experimental results and to extract quantitative information. Even routine tasks such as nanoparticles crystallographic indexing from electron diffraction patterns or from high resolution (S)TEM images are mostly carried out manually by the users, resulting in a reduced TEM characterization yield and significant user bias. This work presents Im2Cr, a new software tool to aid the crystallographic indexing of nanostructured materials using high resolution (S)TEM images. Im2Cr implementation aims for a minimal user interaction, supporting the detection of zone‐axis oriented particles, and including an efficient peak detection process applied to the images Fourier Transform (FT). With basis on the FT peaks distances and relative angles, crystallographic indexation is carried out autonomously via comparison with a list of candidate structures named by the user, and a ranking of the best matching combinations of crystallographic structures and viewing zone axes is generated. Im2Cr was successfully tested for robustness and execution efficiency in a wide range of High Resolution (S)TEM images from crystalline nanomaterials, with domain size ranging from 4 to 100 nm. The autonomous indexation with preset parameters has a very high success rate, and runs in a small fraction of typical (S)TEM images acquisition time by taking advantage of the inherent hardware parallelism. Alternatively, the user can operate Im2Cr in a semi‐autonomous mode and control relevant parameters related to the region of interest (ROI) selection on the (S)TEM image and on the FT peaks detection. Im2Cr promising results point to the possibility of real‐time image analysis with reduced user interaction, allowing for an increased (S)TEM characterization yield and also enabling the interpretation of complex images, such as those from nanocrystalline materials imaged in high‐order zone axis orientations.
AccessOpen access
Appears in Collections:CAlg - Resumos em livros de atas/Abstracts in proceedings
CCTC - Resumos em livros de atas

Files in This Item:
File Description SizeFormat 
EMC2016_Proc.pdf2,73 MBAdobe PDFView/Open

This item is licensed under a Creative Commons License Creative Commons

Partilhe no FacebookPartilhe no TwitterPartilhe no DeliciousPartilhe no LinkedInPartilhe no DiggAdicionar ao Google BookmarksPartilhe no MySpacePartilhe no Orkut
Exporte no formato BibTex mendeley Exporte no formato Endnote Adicione ao seu ORCID