Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/70873
Registo completo
Campo DC | Valor | Idioma |
---|---|---|
dc.contributor.author | Pimentel, Anthony Michael Fernandes | por |
dc.contributor.author | Noversa, João Tiago Gomes | por |
dc.contributor.author | Freitas, Luís Miguel Capela Pereira Leite | por |
dc.contributor.author | Nunes, J. P. | por |
dc.contributor.author | Brito, A. M. | por |
dc.contributor.author | Lima, Ricardo | por |
dc.contributor.author | Alves, Tiago | por |
dc.date.accessioned | 2021-03-19T17:13:45Z | - |
dc.date.available | 2021-03-19T17:13:45Z | - |
dc.date.issued | 2018-09-19 | - |
dc.identifier.citation | Pimentel, A., Noversa, T., Freitas, L., Nunes J. P., Brito, A. M., Lima, R., Alves, T. Mechanical Joining Methods for Additive Manufactured Assembly Tools, Proceedings of the 8th International Conference on Polymers and Moulds Innovation – PMI 2018, Guimarães, Portugal, 19-21st September 2018 | por |
dc.identifier.uri | https://hdl.handle.net/1822/70873 | - |
dc.description.abstract | The use of additive manufacturing (AM) processes is growing in the manufacturing industry. One application with great potential for using these processes is the manufacture of assembly tools for a high-ly competitive markets, such as the automotive industry. A critical aspect of the assembly tool design is its capability to incorporate modifications even at a late stage of its development in very short time. In many cases, these modifications are achieved using metal inserts in the polymeric tool, which allow to add new geometric features. This capability increases the usefulness and versatility of components produced by AM and compensate for potential shortcomings of using additive mate-rials. The purpose of this paper is to evaluate the potential use of accessories in additive manufactured com-ponents. In addition, the effect of different percentages of infill tool material on the joining quality of accesso-ries is evaluated. This is done by performing a screw pull-out test on a ABS ESD-7 part, produced by fused deposition modelling. The following different joining solutions were compared and studied in this work: em-bedded inserts, glue, heating processes, pressure (Tap-in) and creation of threads, such as, printing the thread directly and machining the thread onto the material. | por |
dc.description.sponsorship | Programa Operacional Competitividade e Internacionalização - COMPETE 2020, Projeto nº 002814, Ref. POCI-01-0247-FEDER-002814 entre a Univ. do Minho e a Bosch | por |
dc.language.iso | eng | por |
dc.publisher | Universidade do Minho. Escola de Engenharia (EEng) | por |
dc.relation | POCI-01-0247-FEDER-002814 | por |
dc.rights | openAccess | por |
dc.subject | AM | por |
dc.subject | Additive manufacturing | por |
dc.subject | Mechanical joining | por |
dc.subject | Joining methods | por |
dc.title | Mechanical joining methods for additive manufactured assembly tools | por |
dc.type | conferencePaper | por |
dc.peerreviewed | yes | por |
oaire.citationConferenceDate | 19 - 21 Set. 2018 | por |
sdum.event.title | 8th International Conference on Polymers and Moulds Innovation – PMI 2018 | por |
sdum.event.type | conference | por |
oaire.citationConferencePlace | Guimarães, Portugal | por |
dc.subject.fos | Engenharia e Tecnologia::Engenharia Mecânica | por |
dc.subject.fos | Engenharia e Tecnologia::Engenharia dos Materiais | por |
dc.subject.fos | Engenharia e Tecnologia::Outras Engenharias e Tecnologias | por |
oaire.version | AO | por |
dc.subject.ods | Indústria, inovação e infraestruturas | por |
Aparece nas coleções: | IPC - Textos completos em actas de encontros científicos internacionais com arbitragem |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Paper 159_final.pdf | Artigo apresentado | 625,11 kB | Adobe PDF | Ver/Abrir |