Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/71181
Título: | Assessment of 3D scanners for modeling Pectus Carinatum corrective bar |
Autor(es): | Moreira, António Herculano Jesus Fonseca, João Luís Gomes Rodrigues, Pedro Miguel Loureiro Fonseca, Jaime C. Pinho, A. C. Marques Correia-Pinto, Jorge Rodrigues, Nuno Miguel Feixa Vilaça, João L. |
Palavras-chave: | 3D reconstruction 3D scanner FastSCAN Kinect Pectus carinatum Surface mesh |
Data: | 31-Mai-2013 |
Editora: | SCITEPRESS – Science and Technology Publications |
Resumo(s): | Pectus Carinatum (PC) is a chest deformity consisting on the anterior protrusion of the sternum and adjacent costal cartilages. Non-operative corrections, such as the orthotic compression brace, require previous information of the patient chest surface, to improve the overall brace fit. This paper focuses on the validation of the Kinect scanner for the modelling of an orthotic compression brace for the correction of Pectus Carinatum. To this extent, a phantom chest wall surface was acquired using two scanner systems - Kinect and Polhemus FastSCAN - and compared through CT. The results show a RMS error of 3.25mm between the CT data and the surface mesh from the Kinect sensor and 1.5mm from the FastSCAN sensor. |
Tipo: | Artigo em ata de conferência |
URI: | https://hdl.handle.net/1822/71181 |
ISBN: | 978-989-8565-48-8 |
DOI: | 10.5220/0004300901220125 |
Versão da editora: | https://www.scitepress.org/Link.aspx?doi=10.5220/0004300901220125 |
Arbitragem científica: | yes |
Acesso: | Acesso aberto |
Aparece nas coleções: | DEI - Artigos em atas de congressos internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
VISAPP2013_254.pdf | 302,81 kB | Adobe PDF | Ver/Abrir |