Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/78070
Título: | Numerical simulation of GFRP-reinforced glass structural elements under monotonic loading |
Autor(es): | Rocha, Jorge Pereira, Eduardo Sena-Cruz, José Valarinho, Luís Correia, João Ramôa |
Palavras-chave: | Glass-GFRP composite beams Numerical analysis Smeared crack model Damaged plasticity model Dynamic effects Structural behaviour |
Data: | 2021 |
Editora: | Elsevier |
Revista: | Engineering Structures |
Citação: | Rocha, J., Pereira, E., Sena-Cruz, J., Valarinho, L., & Correia, J. R. (2021). Numerical simulation of GFRP-reinforced glass structural elements under monotonic loading. Engineering Structures, 234, 111968. doi: https://doi.org/10.1016/j.engstruct.2021.111968 |
Resumo(s): | Several reinforcing strategies have recently been developed to overcome glass brittleness and numerical simulations are essential to investigate the structural behaviour of such hybrid systems. Based on previous experimental results from monotonic quasi-static tests, this paper presents a numerical study about the flexural behaviour of glass beams reinforced with glass fibre reinforced polymer (GFRP) laminates bonded with two different adhesives: polyurethane and epoxy. The main objective of this study is to evaluate the efficiency of different constitutive models to simulate the non-linear behaviour of glass, considering the following factors: initial stiffness, cracking load, post-cracking stiffness, crack pattern and progressive failure. The glass is simulated using smeared crack (SCM) and damaged plasticity (DPM) models with static and dynamic numerical approaches. Particular attention is paid to the influence of the several parameters that influence the structural behaviour of glass (e.g. threshold angle), as well as to the interfaces between all the materials involved (e.g. thickness of the adhesive layer). In relation to static numerical approaches, dynamic numerical approaches require more computational effort and their dynamic effects may influence the structural responses obtained; however, they also show to be able to capture all the stages of cracking in greater detail, because stability during cracking formation is guaranteed even at smaller loading stages. Since DPM models do not allow considering a maximum absolute damage factor of 1.0, the smeared crack models simulate better the non-linear behaviour of glass. |
Tipo: | Artigo |
URI: | https://hdl.handle.net/1822/78070 |
DOI: | 10.1016/j.engstruct.2021.111968 |
ISSN: | 0141-0296 |
Versão da editora: | https://www.sciencedirect.com/science/article/pii/S0141029621001188 |
Arbitragem científica: | yes |
Acesso: | Acesso aberto |
Aparece nas coleções: | ISISE - Artigos em Revistas Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
Manuscript_R2_RepositoriUM.pdf | 2,04 MB | Adobe PDF | Ver/Abrir |
Este trabalho está licenciado sob uma Licença Creative Commons