Utilize este identificador para referenciar este registo: https://hdl.handle.net/1822/84150

TítuloOtimização de um processo de tingimento com corantes naturais
Autor(es)Gomes, Carlos Daniel da Costa
Orientador(es)Miranda, Teresa
Palavras-chaveCationização
Corantes naturais
Rendimento colorístico
Tingimento
Natural dyes
Colour yield
Dyeing
Data27-Jul-2022
Resumo(s)Hoje em dia, é notória uma evolução do mercado têxtil que procura adaptar-se às necessidades que aparecem constantemente. Como tal, o setor de beneficiamento de tecidos, no qual se inclui o tingimento, é um dos mais impactantes da indústria têxtil, em função da grande quantidade de água e produtos químicos usados durante todo este processo. Para colmatar este problema, o mercado tem manifestado um crescente interesse em agregar valor às matérias têxteis com produtos naturais. O tingimento natural apresenta-se como uma ótima alternativa para a inserção de práticas sustentáveis na cadeia têxtil, uma vez que utiliza corantes naturais que são renováveis, biodegradáveis e não tóxicos. Por conseguinte, o presente estudo tem como principal objetivo a otimização de tingimentos com corantes naturais nos quais se obtenham bons resultados de solidez à luz, solidez à lavagem, solidez às lavagens múltiplas e solidez à fricção a seco e a húmido. Visando atingi-lo, procedeu-se à otimização de um processo de tingimento que permitisse a obtenção de substratos têxteis tingidos uniformemente e com as características relativas à solidez supramencionadas. Numa primeira fase, foi escolhido um corante natural obtido através das folhas da amoreira, sendo este utilizado em todos os tingimentos efetuados neste estudo. Posteriormente, foram estudados quais os fatores que seriam alterados durante o processo de tingimento. Para aumentar a afinidade entre as fibras têxteis e a molécula de corante estudou-se um processo de cationização utilizando sais de amónio quaternário, que foi, em seguida, comparado com um processo utilizando o mordente alúmen de potássio e de seguida o mordente sumagre. Visando a melhoria dos resultados obtidos, foi estudada a possibilidade de incrementar algumas etapas pós-tingimento no sentido de melhorar a solidez à luz e a solidez à lavagem. Os estudos realizados permitiram a avaliação das propriedades de maior interesse como o rendimento colorístico, uniformidade do tingimento obtido, resultados da solidez à luz e resultados de solidez às lavagens múltiplas. A análise destes resultados revelou que o tingimento a pH alcalino, a baixa temperatura (30ºC), com 5% do fixador catiónico foi o que obteve melhores resultados.
Nowadays, there is a notorious evolution in the textile market which seeks to adapt itself to the needs that constantly arise. As such, the sector of fabric processing, in which dyeing is included, is one of the most impacting in the textile industry, due to the large amount of water and chemical products used throughout this process. To overcome this problem, the market has shown a growing interest in adding value to textile materials with natural products. Natural dyeing presents itself as an excellent alternative for the implementation of sustainable practices in the textile chain, since it uses natural dyes which are renewable, biodegradable and non-toxic. Thus, this study’s main goal consists of the optimization of dyeing with natural dyes which obtain satisfactory results regarding light fastness, fastness to washing, fastness to multiple washings and fastness to both dry and wet rubbing. Aiming to achieve this, a dyeing process was optimized to obtain uniformly dyed textile substrates with the aforementioned fastness characteristics. In an initial stage, a natural dye obtained from mulberry leaves was chosen, and it was used in all the dyeing processes carried out in this study. Afterwards, the factors that would be altered during the dyeing process were studied. In order to increase the affinity between the textile fibres and the dye molecule, a cationization process was studied using quaternary ammonium salts. This was subsequently compared to a process using the mordant potassium alum and then the mordant sumac. Aiming towards the improvement of the results obtained, the possibility of increasing some post-dyeing steps was studied so as to improve the light fastness and the fastness to washing. The studies performed allowed the evaluation of the most noteworthy properties, such as colour yield, uniformity of the dyeing obtained, light fastness results and multiple wash fastness results. The analysis of these results revealed that the dyeing at alkaline pH, at a low temperature (30ºC), with 5% of the cationic fixative was the one which obtained the best results.
TipoDissertação de mestrado
DescriçãoDissertação de mestrado integrado em Engenharia Têxtil
URIhttps://hdl.handle.net/1822/84150
AcessoAcesso aberto
Aparece nas coleções:BUM - Dissertações de Mestrado
DET/2C2T - Dissertações de mestrado

Ficheiros deste registo:
Ficheiro Descrição TamanhoFormato 
Carlos Daniel da Costa Gomes.pdf1,97 MBAdobe PDFVer/Abrir

Este trabalho está licenciado sob uma Licença Creative Commons Creative Commons

Partilhe no FacebookPartilhe no TwitterPartilhe no DeliciousPartilhe no LinkedInPartilhe no DiggAdicionar ao Google BookmarksPartilhe no MySpacePartilhe no Orkut
Exporte no formato BibTex mendeley Exporte no formato Endnote Adicione ao seu ORCID