Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/2599
Registo completo
Campo DC | Valor | Idioma |
---|---|---|
dc.contributor.author | Costa, Lucrécio | - |
dc.contributor.author | Miranda, A. S. | - |
dc.contributor.author | Claro, José Carlos Pimenta | - |
dc.contributor.author | Fillon, M. | - |
dc.date.accessioned | 2005-08-23T14:06:58Z | - |
dc.date.available | 2005-08-23T14:06:58Z | - |
dc.date.issued | 2003 | - |
dc.identifier.citation | "Lubrication science". ISSN 0954-0075. 15:2 (2003) 1-15. | eng |
dc.identifier.issn | 0954-0075 | eng |
dc.identifier.uri | https://hdl.handle.net/1822/2599 | - |
dc.description.abstract | Parametric experiments were conducted to analyse the influence of some supply conditions on the performance of a steadily loaded journal bearing. The temperature distribution on the internal surface, the flow rate, and the bearing eccentricity were measured for different sets of operating conditions, under variable supply conditions. Quantitative information was provided which showed the effect of both shaft speed and applied load on maximum bush temperature and flow rate. It was observed that flow rate was moderately affected by load and significantly affected by rotational speed, oil supply temperature, and supply pressure. The maximum bush temperature was moderately affected by supply pressure and load, and significantly affected by shaft speed. For low applied loads, the attitude angle was markedly affected by supply pressure. The experimental results also showed that for a small groove length there was a variation in bush temperature in the axial direction in the groove region. | eng |
dc.description.sponsorship | (undefined) | por |
dc.language.iso | eng | eng |
dc.publisher | Leaf Coppin Publications | eng |
dc.rights | openAccess | eng |
dc.subject | Journal bearing | eng |
dc.subject | Bearing performance | eng |
dc.subject | Eccentricity | eng |
dc.subject | Temperature | eng |
dc.subject | Flow rate | eng |
dc.subject | Single axial groove | eng |
dc.subject | Temperature distribution | por |
dc.title | Temperature, flow, and eccentricity measurements in a journal bearing with a single axial groove at 90° to the load line | eng |
dc.type | article | eng |
dc.peerreviewed | yes | eng |
sdum.publicationstatus | published | eng |
oaire.citationStartPage | 147 | por |
oaire.citationEndPage | 161 | por |
oaire.citationIssue | 2 | por |
oaire.citationVolume | 15 | por |
dc.identifier.doi | 10.1002/ls.3010150205 | por |
sdum.journal | Lubrication science | por |
Aparece nas coleções: | CIICS - Artigos em revistas de circulação internacional com arbitragem científica DEM - Artigos em revistas de circulação internacional com arbitragem científica |