Utilize este identificador para referenciar este registo:
https://hdl.handle.net/1822/33231
Registo completo
Campo DC | Valor | Idioma |
---|---|---|
dc.contributor.author | Martins, João | por |
dc.contributor.author | Correia, A. Gomes | por |
dc.date.accessioned | 2015-01-27T11:59:36Z | - |
dc.date.available | 2015-01-27T11:59:36Z | - |
dc.date.issued | 2015-01 | - |
dc.date.submitted | 2014-02 | - |
dc.identifier.citation | Martins, J., & Gomes Correia, A. (2015). Comparison Between Laboratory and Field Stiffness by Wave Measurements. Journal of Testing and Evaluation, 43(2). doi: 10.1520/jte20140087 | por |
dc.identifier.issn | 0090-3973 | por |
dc.identifier.uri | https://hdl.handle.net/1822/33231 | - |
dc.description.abstract | The present work aims to establish a relationship between field and laboratory moduli obtained from mechanical wave measurements. Spectral analysis of surface waves was performed on a clayey sand trial layer during tests in a full-scale trial. Laboratory triaxial tests involving S-wave measurements with bender elements and accelerometers were conducted on specimens under similar conditions, and the shear modulus was determined. Both laboratory and field methodologies for the determination of the shear modulus were based on S-wave propagation through the tested material; thus they involved similar stress and strain levels. A reasonable relationship was observed between field and laboratory moduli, taking into account field conditions (moisture content and void ratio) and stress state. | por |
dc.description.sponsorship | Fundação para a Ciência e a Tecnologia (FCT) | por |
dc.language.iso | eng | por |
dc.publisher | ASTM International | por |
dc.rights | restrictedAccess | por |
dc.subject | Stiffness | por |
dc.subject | Wave measurements | por |
dc.subject | SASW | por |
dc.subject | Bender elements | por |
dc.subject | Shear modulus | por |
dc.subject | Non saturated | por |
dc.title | Comparison between laboratory and field stiffness by wave measurements | por |
dc.type | article | - |
dc.peerreviewed | yes | por |
dc.relation.publisherversion | http://www.astm.org/DIGITAL_LIBRARY/JOURNALS/TESTEVAL/PAGES/JTE20140087.htm | por |
sdum.publicationstatus | published | por |
oaire.citationStartPage | 452 | por |
oaire.citationEndPage | 464 | por |
oaire.citationIssue | 2 | por |
oaire.citationVolume | 43 | por |
dc.identifier.doi | 10.1520/JTE20140087 | por |
dc.subject.fos | Engenharia e Tecnologia::Engenharia Civil | por |
dc.subject.wos | Science & Technology | por |
sdum.journal | Journal of Testing and Evaluation | por |
Aparece nas coleções: | ISISE - Artigos em Revistas Internacionais |
Ficheiros deste registo:
Ficheiro | Descrição | Tamanho | Formato | |
---|---|---|---|---|
ASTM-JTE_March2015.pdf Acesso restrito! | Full paper | 1,66 MB | Adobe PDF | Ver/Abrir |