Mostrar 1-20 de um total de 22 resultados.
próximo >
Data | Título | Autor(es) | Tipo | Acesso |
2023 | 3D multi material laser powder bed fusion: Ti6Al4V–CuNi2SiCr parts for aerospace applications | Marques, A.; Cunha, A.; Gasik, M., et al. | Artigo | Acesso restrito autor |
2021 | Adjunctive procedure with solvent mixtures in non-surgical endodontic retreatment: does it affect root dentin hardness? | Ferreira, Inês; Braga, A. C.; Lopes, Maria Ascensão, et al. | Artigo | Acesso restrito UMinho |
Jan-2015 | Biotribological behavior of Ag-ZrCxN1-x coatings against UHMWPE for joint prostheses devices | Velasco, Sebastian Calderon; Sánchez-López, J. C.; Cavaleiro, Albano, et al. | Artigo | Acesso restrito UMinho |
15-Ago-2017 | Characterization of magnetron sputtered sub-stoichiometric CrAlSiNx and CrAlSiOyNx coatings | Al-Rjoub, A.; Costa, P.; Rebouta, L., et al. | Artigo | Acesso aberto |
Abr-2013 | Improving tribological properties of cast Al-Si alloys through application of wear-resistant thermal spray coatings | Culliton, David; Betts, Anthony; Carvalho, S., et al. | Artigo | Acesso aberto |
2007 | In vitro monitoring of surface mechanical properties of poly(L-lactic acid) using microhardness | Saiz-Arroyo, C.; Wang, Y.; Rodriguez-Perez, M. A., et al. | Artigo | Acesso aberto |
2023 | Inconel 718 produced by hot pressing: optimization of temperature and pressure conditions | Marques, Ana Cristina Ribeiro; Cunha, Ângela Sofia Varela; Bartolomeu, Flávio, et al. | Artigo | Acesso restrito autor |
2008 | Influence of air oxidation on the properties of decorative NbOxNy coatings prepared by reactive gas pulsing | Chappé, J. M.; Carvalho, P.; Lanceros-Méndez, S., et al. | Artigo | Acesso restrito UMinho |
2010 | Influence of composition and structural properties in the tribological behaviour of magnetron sputtered Ti–Si–C nanostructured thin films, prepared at low temperature | Munteanu, D.; Ionescu, C.; Olteanu, C., et al. | Artigo | Acesso aberto |
15-Dez-2022 | Influence of laser parameters on the texturing of 420 stainless steel | Cunha, Ângela Sofia Varela; Bartolomeu, Flávio; Silva, Filipe, et al. | Artigo | Acesso aberto |
2003 | Joining Ti-47Al-2Cr-2Nb with a Ti/(Cu,Ni)/Ti clad-laminated braze alloy | Guedes, A.; Pinto, A. M. P.; Vieira, M. F., et al. | Artigo | Acesso aberto |
2019 | Multilayer design of crN/MoN superhard protective coatings and their characterisation | Postolnyi, B. O.; Bondar, O. V.; Zaleski, K., et al. | Capítulo de livro | Acesso restrito UMinho |
Dez-2012 | Nanoporous alumina templates : anodisation and mechanical characterisation | Samantilleke, A. P.; Carneiro, Joaquim A. O.; Alpuim, P., et al. | Capítulo de livro | Acesso aberto |
7-Abr-2005 | Optimization and thermal stability of TiAlN-Mo multilayers | Tavares, C. J.; Vidrago, C.; Rebouta, L., et al. | Artigo | Acesso aberto |
2014 | Prediction of optimized composition for enhanced mechanical and electrochemical response of Zr-C-N-Ag coatings for medical devices | Velasco, Sebastian Calderon; Oliveira, J. C.; Evaristo, M., et al. | Artigo | Acesso restrito UMinho |
13-Out-2022 | Production of a multi-functional 420 stainless steel-copper surface by laser texturing and hot pressing: a new solution for plastic injection moulds | Cunha, Ângela Sofia Varela; Marques, Ana Cristina Ribeiro; Guimarães, Bruno Miguel Pereira, et al. | Artigo | Acesso restrito autor |
7-Set-2010 | Structure-property relations in ZrCN coatings for tribologic applications | Silva, E.; Figueiredo, M. Rebelo; Franz, R., et al. | Artigo | Acesso aberto |
Set-2018 | Superhard CrN/MoN films with multilayer architecture | Pogrebnjak, A. D.; Beresnev, V. M.; Bondar, O. V., et al. | Artigo | Acesso aberto |
2014 | Tantalum oxynitride thin films: mechanical properties and wear behavior dependence on growth conditions | Cristea, D.; Crisan, A.; Munteanua, D., et al. | Artigo | Acesso restrito UMinho |
2022 | Tantalum-titanium oxynitride thin films deposited by DC reactive magnetronic co-sputtering: mechanical, optical, and electrical characterization | Cristea, Daniel; Velicu, Ioana-Laura; Cunha, L., et al. | Artigo | Acesso aberto |