Influence of service temperature on shear creep behaviour of a rigid low-density closed-cell PIR foam

Abstract

An experimental campaign was carried out to assess shear creep behaviour of a rigid low-density closed-cell polyisocyanurate (PIR) foam. Two service temperature values were considered, 20 ºC and 30 ºC, and the applied stresses ranged between 20% and 60% of the corresponding shear strength. The results showed that a stress amplitude of 30% was enough to cause nonlinear creep response. Furthermore, creep deformations were slightly smaller in the tests at 30 ºC, a fact that matched the viscoelastic response of the PIR foam obtained from DMA testing. Finally, creep prediction curves were calibrated through an analytical approach based on the Findley’s power law.