Translational joints with clearance in rigid multibody systems

dc.contributor.authorFlores, Paulo
dc.contributor.authorAmbrósio, Jorge
dc.contributor.authorClaro, José Carlos Pimenta
dc.contributor.authorLankarani, H. M.
dc.date.accessioned2013-03-04T10:53:28Z
dc.date.available2013-03-04T10:53:28Z
dc.date.issued2008
dc.description.abstractA computational methodology for dynamic description of rigid multibody systems with translational clearance joints is presented and discussed in this work. Over the last years, extensive work has been done to study the dynamic effect of the revolute joints with clearance in multibody systems, in contrast with the little work devoted to model translational joints with clearance. In a joint with translation clearance there are many possible ways to set the physical configuration between the slider and guide, namely: (i) no contact between the two elements, (ii) one corner of the slider in contact with the guide surface, (iii) two adjacent slider corners in contact with the guide surface, (iv) two opposite slider corners in contact with the guide surfaces. The proposed methodology takes into account these four different situations. The conditions for switching from one case to another depend on the system dynamics configuration. The existence of a clearance in a translational joint removes two kinematic constraints from a planar system and introduces two extra degrees of freedom in the system. Thus, a translational clearance joint does not constrain any degree of freedom of the mechanical system but it imposes some restrictions on the slider motion inside the guide limits. When the slider reaches the guide surfaces an impact occurs and the dynamic response of the joint is modeled by contact-impact forces. These forces are evaluated here with continuous contact force law together with a dissipative friction force model. The contact-impact forces are introduced into the system’s equations of motion as external generalized forces. The proposed methodology is applied to a planar multibody mechanical system with a translational clearance joint in order to demonstrate its features.por
dc.description.sponsorshipFundação para a Ciência e a Tecnologia (FCT)por
dc.distributioninternationalpor
dc.identifier.doi10.1115/1.2802113por
dc.identifier.issn1555-1423por
dc.identifier.urihttps://hdl.handle.net/1822/23276
dc.language.isoengpor
dc.peerreviewedyespor
dc.publisherASMEpor
dc.relation.publisherversionwww.asme.orgpor
dc.rightsopenAccesspor
dc.subjectClearance jointspor
dc.subjectMultibody dynamicspor
dc.subjectContact-impact forcespor
dc.subject.wosScience & Technologypor
dc.titleTranslational joints with clearance in rigid multibody systemspor
dc.typearticlepor
dspace.entity.typePublicationen
oaire.citationEndPage28por
oaire.citationIssue1por
oaire.citationStartPage1por
oaire.citationTitleJournal of Computational and Nonlinear Dynamicspor
oaire.citationVolume3por
sdum.journalJournal of Computational and Nonlinear Dynamicspor
sdum.publicationstatuspublishedpor

Ficheiros

Pacote original

A mostrar 1 - 1 de 1
A carregar...
Nome:
6.7.11 2008.pdf
Tamanho:
2.56 MB
Formato:
Adobe Portable Document Format
Descrição:
Documento principal