Durability of bond in NSM CFRP-concrete systems under different environmental conditions

dc.contributor.authorFernandes, Pedro Miguel Gomespor
dc.contributor.authorSena-Cruz, Josépor
dc.contributor.authorXavier, Josépor
dc.contributor.authorSilva, Patrícia Moreirapor
dc.contributor.authorPereira, E. N. B.por
dc.contributor.authorCruz, José Ricardo Loureiropor
dc.date.accessioned2019-01-24T17:20:58Z
dc.date.available2019-01-24T17:20:58Z
dc.date.issued2018-04
dc.date.submitted2017-03
dc.description.abstractThis paper addresses the durability of bond between concrete and carbon fibre reinforced polymer (CFRP) strips installed according to the near-surface mounted (NSM) technique (NSM CFRP-concrete systems) under the effects of two main groups of environmental conditions: (i) laboratory-based ageing conditions; (ii) real outdoor ageing conditions. The bond degradation was evaluated by carrying out direct pullout tests on aged specimens that were previously subjected to distinct environmental conditions for different periods of exposure. Moreover, the degradation of the mechanical properties of the involved materials was investigated. The digital image correlation (DIC) method was used to document the evolution of the deformation fields at the surface over the whole region of interest consisting of concrete and epoxy adhesive at the ligament region. This information supported the discussion about the evolution of the bond resistant mechanism developed in NSM CFRP-concrete specimens during testing, as well as the assessment of the bond quality of the system. In general, the results obtained from the durability tests conducted have shown that the different exposure environments, which may be considered as quite severe, did not result in significant damage on NSM CFRP-concrete system. The maximum decrease of about 12% on bond strength was obtained for real outdoor environments. Conversely, a maximum increase of 8% on bond strength was obtained on the specimens exposed to the temperature cycles between –15 °C and +60 °C. DIC allowed to document the stress transfer mechanisms established between the CFRP and the concrete substrate, revealing the crack patterns and the influence widths of the CFRP reinforcement strips, which were shown to be important for avoiding group effect when using multiple parallel strengthening CFRP strips.por
dc.description.publicationversioninfo:eu-repo/semantics/publishedVersionpor
dc.description.sponsorshipFEDER funds through the Operational Program for Competitiveness Factors - COMPETE and National Funds through FCT - Portuguese Foundation for Science and Technology under the projects CutInDur FCOMP-01-0124-FEDER-014811 (PTDC/ECM/112396/2009), FRPLongDur POCI-01-0145-FEDER-016900 (PTDC/ECM-EST/1282/2014) and partly financed by the project POCI-01-0145-FEDER-007633. The authors also like to thank all the companies that have been involved supporting and contributing for the development of this study, mainly: S&P Clever Reinforcement Ibérica Lda., Artecanter - Indústria de Transformação de Granitos, Lda., Vialam – Indústrias Metalúrgicas e Metalomecânicas, Lda.por
dc.distributioninternationalpor
dc.identifier.citationFernandes, P., Sena-Cruz, J., Xavier, J., Silva, P., Pereira, E., & Cruz, J. (2018). Durability of bond in NSM CFRP-concrete systems under different environmental conditions. Composites Part B: Engineering, 138, 19-34.por
dc.identifier.doi10.1016/j.compositesb.2017.11.022por
dc.identifier.issn1359-8368por
dc.identifier.urihttps://hdl.handle.net/1822/58557
dc.language.isoengpor
dc.peerreviewedyespor
dc.publisherElsevierpor
dc.relationinfo:eu-repo/grantAgreement/FCT/5876-PPCDTI/112396/PTpor
dc.relation.publisherversionhttps://www.sciencedirect.com/science/article/pii/S1359836817311332por
dc.rightsopenAccesspor
dc.rights.urihttp://creativecommons.org/licenses/by/4.0/por
dc.subjectCarbon fibrepor
dc.subjectDebondingpor
dc.subjectEnvironmental degradationpor
dc.subjectNear-surface mounted systemspor
dc.subjectMechanical testingpor
dc.subject.fosEngenharia e Tecnologia::Engenharia Civilpor
dc.subject.wosScience & Technologypor
dc.titleDurability of bond in NSM CFRP-concrete systems under different environmental conditionspor
dc.typearticle
dspace.entity.typePublicationen
oaire.citationEndPage34por
oaire.citationStartPage19por
oaire.citationVolume138por
sdum.journalComposites Part B: Engineeringpor

Ficheiros

Pacote original

A mostrar 1 - 1 de 1
A carregar...
Nome:
Manuscript_R3_Repositorium.pdf
Tamanho:
1.54 MB
Formato:
Adobe Portable Document Format