Feasibility assessment of manufacturing green concrete by combination of wastewater and glass powder
Avaliação da viabilidade da produção de betão verde pela combinação de águas residuais e pó de vidro
| dc.comments | EE/2026/1068 | |
| dc.contributor.advisor | Teixeira, Elisabete Rodrigues | |
| dc.contributor.advisor | Matos, José C. | |
| dc.contributor.advisor | Zhang, Yixia | |
| dc.contributor.author | Hassani, Mohammad Sheikh | |
| dc.date.accessioned | 2026-07-07T10:56:23Z | |
| dc.date.embargo | 2027-01-28 | |
| dc.date.issued | 2026-01-28 | |
| dc.date.submitted | 2026-02 | |
| dc.description.abstract | A indústria da construção enfrenta uma crise global impulsionada pela escassez de água, pelas emissões de gases com efeito de estufa e pela exaustão de matérias-primas. Em resposta, a reutilização e reciclagem de resíduos líquidos e sólidos têm emergido como estratégias práticas e inovadoras rumo à sustentabilidade. O betão é um dos maiores consumidores de água potável e de matérias-primas; contudo, a crescente atenção à sustentabilidade tem evidenciado o potencial de materiais não convencionais na produção de betões mais ecológicos. Estudos recentes demonstram que a incorporação de resíduos pode manter ou até melhorar a qualidade e a durabilidade do betão, ao mesmo tempo que promove a sustentabilidade ambiental. A utilização de águas residuais em substituição da água potável surge como uma solução viável para enfrentar a escassez hídrica, apresentando diversas vantagens; no entanto, a presença de impurezas e contaminantes pode originar certas limitações mecânicas e de durabilidade. Para compensar estas potenciais perdas, a incorporação de outro resíduo capaz de melhorar o desempenho global, reforçando simultaneamente a sustentabilidade, torna-se uma abordagem apelativa. As águas residuais e o pó de vidro estão entre os resíduos que revelaram resultados promissores quando aplicados de forma isolada, mas a sua combinação nunca foi anteriormente estudada. Assim, o principal objetivo do presente estudo consistiu em investigar, pela primeira vez, a viabilidade da produção de betão verde através da combinação simultânea destes dois resíduos, colmatando uma lacuna existente na investigação. Para avaliar as propriedades mecânicas, de durabilidade e de sustentabilidade. O estudo demonstrou que tanto as águas residuais de efluente como as terciárias podem substituir totalmente a água potável no betão, apresentando apenas reduções ligeiras no desempenho mecânico e de durabilidade, mas proporcionando benefícios ambientais significativos, em especial no caso das águas residuais tratadas e de razões água/aglomerante mais baixas. O pó de vidro reduziu o desempenho global do betão, mas melhorou de forma expressiva a sustentabilidade. A combinação de águas residuais tratadas com 10% de pó de vidro (WT0.45GP10%) alcançou o melhor equilíbrio entre resistência, durabilidade e sustentabilidade. Em contraste, as misturas com 20% de pó de vidro, apesar dos maiores ganhos ambientais, revelaram-se menos adequadas devido a reduções mecânicas significativas. | por |
| dc.description.abstract | The construction industry faces a global crisis driven by water scarcity, greenhouse gas emissions, and the depletion of raw materials. In response, the reuse and recycling of both liquid and solid waste have emerged as practical and forward-thinking strategies toward sustainability. Concrete is among the largest consumers of freshwater and raw materials; however, growing attention to sustainability has highlighted the promise of unconventional materials in producing greener concrete. Recent studies show that incorporating waste materials can maintain or enhance the quality and durability of concrete, while also advancing environmental sustainability. The use of wastewater instead of freshwater presents a viable solution to address water scarcity, offering several key advantages; however, the presence of impurities and contaminants may result in certain mechanical and durability drawbacks. To compensate for these potential losses, incorporating another waste that might improve overall performance while further enhancing the sustainability is captivating. Wastewater and glass powder are among the waste materials that showed promising results separately, but their combination never studied before. Therefore, the main goal of current study was to investigate the feasibility of manufacturing green concrete by combination of these two waste simultaneously to fill the research gap for the first time. To evaluate the mechanical, durability and sustainability properties, tests such as workability, compressive and flexural strength, water absorption by immersion and capillarity, ultrasonic pulse velocity, alkaline and carbonation resistance and life cycle assessment were considered. This study showed that both effluent and tertiary wastewater types can be replaced fully with potable water in concrete with only minor reductions in mechanical and durability performance, while offering major environmental benefits, particularly in treated wastewater and lower water to binder ratios. Glass powder reduced overall concrete performance but improved sustainability significantly. The combination of treated wastewater with 10% glass powder (WT0.45GP10%) achieved the best balance of strength, durability, and sustainability. In contrast, 20% of glass powder mixes, despite higher environmental gains, were less suitable due to significant mechanical drawbacks. | eng |
| dc.description.sponsorship | I am grateful to Fundação para a Ciência e a Tecnologia (FCT) for the financial support that made this work possible. This work is financed by national funds through FCT—Foundation for Science and Technology, under a grant agreement [2021.06765.BD]. I also wish to thank the Department of Civil Engineering at the University of Minho, providing the necessary facilities, resources, and a stimulating academic environment. This work was partly financed by FCT/MCTES through national funds (PIDDAC) under the R&D Unit Institute for Sustainability and Innovation in Structural Engineering (ISISE), under reference UIDB/04029/2020 and under the Associate Laboratory Advanced Production and Intelligent Systems ARISE under reference LA/P/0112/2020. | |
| dc.identifier.tid | 101730543 | |
| dc.identifier.uri | https://hdl.handle.net/1822/102493 | |
| dc.language.iso | eng | |
| dc.relation | Feasibility assessment of manufacturing green concrete by combination of wastewater and glass powder [2021.06765.BD] | |
| dc.relation | Institute for Sustainability and Innovation in Structural Engineering [UIDB/04029/2020] | |
| dc.relation | Advanced Production and Intelligent Systems [LA/P/0112/2020] | |
| dc.rights | embargoedAccess (1 Year) | |
| dc.rights.uri | http://creativecommons.org/licenses/by-nc-nd/4.0/ | |
| dc.subject | Betão verde | |
| dc.subject | Sustentabilidade | |
| dc.subject | Resíduos | |
| dc.subject | Águas residuais | |
| dc.subject | Pó de vidro | |
| dc.subject | Green concrete | |
| dc.subject | Sustainability | |
| dc.subject | Waste materials | |
| dc.subject | Wastewater | |
| dc.subject | Glass powder | |
| dc.subject.fos | Engenharia e Tecnologia::Engenharia Civil | |
| dc.title | Feasibility assessment of manufacturing green concrete by combination of wastewater and glass powder | eng |
| dc.title.alternative | Avaliação da viabilidade da produção de betão verde pela combinação de águas residuais e pó de vidro | por |
| dc.type | doctoralThesis | |
| dspace.entity.type | Publication | |
| oaire.awardNumber | 2021.06765.BD | |
| oaire.awardNumber | UIDB/04029/2020 | |
| oaire.awardNumber | LA/P/0112/2020 | |
| oaire.awardTitle | Feasibility assessment of manufacturing green concrete by combination of wastewater and glass powder [2021.06765.BD] | |
| oaire.awardTitle | Institute for Sustainability and Innovation in Structural Engineering [UIDB/04029/2020] | |
| oaire.awardTitle | Advanced Production and Intelligent Systems [LA/P/0112/2020] | |
| oaire.awardURI | https://hdl.handle.net/1822/102492 | |
| oaire.awardURI | https://hdl.handle.net/1822/97640 | |
| oaire.awardURI | https://hdl.handle.net/1822/97535 | |
| oaire.funderIdentifier | http://doi.org/10.13039/501100001871 | |
| oaire.funderIdentifier | http://doi.org/10.13039/501100001871 | |
| oaire.funderIdentifier | http://doi.org/10.13039/501100001871 | |
| oaire.funderName | Fundação para a Ciência e a Tecnologia, I.P. | |
| oaire.funderName | Fundação para a Ciência e a Tecnologia, I.P. | |
| oaire.funderName | Fundação para a Ciência e a Tecnologia, I.P. | |
| oaire.fundingStream | Concurso de avaliação no âmbito do Programa Plurianual de Financiamento de Unidades de I&D (2017/2018) - Financiamento Base | |
| oaire.fundingStream | Concurso para Atribuição do Estatuto e Financiamento de Laboratórios Associados (LA) | |
| relation.isProjectOfPublication | ead8e657-64c9-4220-a77a-ac943dde9c6b | |
| relation.isProjectOfPublication | ed595047-c351-4468-b4ed-fe3fcff0c00b | |
| relation.isProjectOfPublication | 3959633d-5d07-4df3-80e7-77956772f5bf | |
| relation.isProjectOfPublication.latestForDiscovery | ead8e657-64c9-4220-a77a-ac943dde9c6b | |
| sdum.degree.grade | Muito bom | |
| sdum.uoei | Escola de Engenharia | |
| thesis.degree.grantor | Universidade do Minho | por |
| thesis.degree.name | Doutoramento em Engenharia Civil |
Ficheiros
Pacote original
1 - 1 de 1
A carregar...
- Nome:
- Mohammad Sheikh Hassani.pdf
- Tamanho:
- 13.75 MB
- Formato:
- Adobe Portable Document Format