A wireless RF CMOS mixed-signal interface for soil moisture measurements

Abstract

This paper describes a wireless RF CMOS interface for soil moisture measurements. The interface basically comprises a Delta-Sigma (ΔΣ) modulator for acquiring an external sensor signal, and a RF section where data is transmitted to a local processing unit. The ΔΣ modulator is a single-bit, second-order modulator and it is implemented using switched-capacitors techniques in a fully-differential topology. With a sampling frequency of 423.75 kHz and an oversampling ratio (OSR) of 256, the modulator achieves a dynamic range of 98.7 dB (16.1 bit). The output of the modulator is applied to a counter, as a first-order decimation filter, and the result is stored. Prior to transmission, data is encoded as a pulse width modulated signal and assembled in a frame containing preamble and checksum control fields. This frame is then transmitted through a power amplifier operating at 433.92 MHz in class-E mode. To evaluate the ΔΣ modulator performance, the bitstream was acquired and transferred to a personal computer to perform digital filtering and decimation using MATLAB. The soil moisture sensor is based on dual-probe heat-pulse (DPHP) method and is implemented by using an integrated temperature sensor and a heater. After applying a heat-pulse for a fixed period of time, the temperature rise, that is a function of soil moisture, generates a differential voltage that is amplified and applied to the mixed-signal interface input. The described interface can also be used with other kinds of environmental sensors in a wireless sensors network. The CMOS mixed-signal interface has been implemented in a single-chip using a standard CMOS 0.7 μm process (AMI C07M-A, n-well, 2 metals and 1 poly).