Development of structural colors, assisted by plasma technology and biopolymer coating, for high visibility technical fabrics

Desenvolvimento de cores estruturais, auxiliado pela tecnologia de plasma e revestimento de biopolímeros, para têxteis técnicos de alta visibilidade
dc.commentsEE/2026/3752
dc.contributor.advisorZille, Andrea
dc.contributor.advisorSouto, A. Pedro
dc.contributor.authorFernandes, Rui Daniel Vilaça
dc.date.accessioned2026-07-23T13:38:14Z
dc.date.issued2026-07-06
dc.date.submitted2026-07
dc.description.abstractThe textile industry is considered one of the most polluting industries in the world. One of the main ecological concerns is the high consumption of water used in textile processing and its effluents, which contain a high load of environmentally toxic chemicals. The application of photonic crystals (PCs) allows the coloring of textile substrates by structural coloration, possibly mitigating this ecological problem, as water consumption is drastically reduced. This research project presents a thorough colorimetric study to evaluate PCs capability of substituting conventional dyes. PCs with different chemical compositions (P(St-MMA-AA), SiO2 and Kraft lignin (KL)) were synthetized, characterized and applied onto three different textiles substrates, polyamide (PA), polyester (PES) and cotton (CO). The sizes of the synthesized PCs were determined by Dynamic Light Scattering and Scanning Electronic Microscopy techniques. With the obtained PCs several structural colors were produced, namely violet, blue, green, yellow and red. As the native color of KL is brown, it possibly masked the reflectance of the produce structural color, only presenting some iridescent effect (in glass substrate). Among all possible PC/substrate combination, the best colorimetric response was obtained with P(St-MMA-AA) deposited onto PA’s surface. As such, these fabrics were characterized in more details in opposition to the other PC type/substrate combinations. Nevertheless, the other PC/substrate combinations were also characterized, to an extent. P(St-MMA-AA)/PA presented remarkable brightness and iridescent effect, being exhaustively studied by SEM and UV/Vis spectroscopy techniques, confirming the PC self-assembly (hexagonal packed structure) and iridescence effect through UV/Vis band shifting. Regarding color fastness, P(St-MMA-AA)/PA presented excellent light fastness without any finishing coating applied. As for washing fastness, several biopolymers and commercial finishing agents were tested, where most failed to retain the coating and color properties. The exception was SylgardÔ 184, a commercial silicone-based coating agent, which could maintain color, brightness and iridescence after washing fastness tests. Pristine PC mixture and the influence of color substrate when combined with pristine/dyed PCs were also studied. Both studies showed that PCs follow the principle of color addition, however the dye color overwhelms structural color when its concentration is greater than 1 wt%. With this research project, an alternative and more sustainable coloration method was developed, aiming its application in technical fabrics with high visibility for segments of workwear and/or sportswear.eng
dc.description.abstractA indústria têxtil é considerada uma das mais poluentes do mundo. Uma das principais preocupações ecológicas é o elevado consumo de água utilizado, onde os seus efluentes contêm uma elevada carga de substâncias químicas tóxicas. A aplicação de cristais fotónicos (PCs) permite a coloração de substratos têxteis através da cor estrutural, possivelmente mitigando este problema ecológico, uma vez que o consumo de água é drasticamente reduzido. Este projeto de investigação apresenta um estudo colorimétrico detalhado para avaliar a capacidade dos PCs em substituir corantes convencionais. PCs com diferentes composições químicas (P(St-MMA-AA), SiO₂ e Lignina Kraft (KL)) foram sintetizados, caracterizados e aplicados em três diferentes substratos têxteis, poliamida (PA), poliéster (PES) e algodão (CO). O tamanho dos PCs sintetizados foi determinado por técnicas de Espalhamento Dinâmico de Luz e Microscopia Eletrónica de Varrimento. Os PCs obtidos permitiram produzir várias cores estruturais, nomeadamente violeta, azul, verde, amarelo e vermelho. Como a cor nativa da KL é castanha, esta possivelmente mascarou a cor estrutural produzida, apresentando apenas efeito iridescente (em substrato de vidro). De entre todas as combinações possíveis de PC/substrato, a melhor resposta colorimétrica foi obtida com o P(St-MMA-AA) depositado na superfície do PA. Assim, estes tecidos foram caracterizados com mais detalhe de que as outras combinações de PC/substrato. O P(St-MMA-AA)/PA apresentou brilho e um efeito iridescente notáveis, sendo exaustivamente estudado por técnicas de MEV e espectroscopia UV/Vis, confirmando a auto-organização dos PCs (estrutura hexagonal compacta) e o efeito de iridescência através do deslocamento das bandas de refletância. Em relação à solidez da cor, o P(St-MMA-AA)/PA apresentou uma excelente resistência à luz sem a aplicação de qualquer acabamento. Quanto à solidez à lavagem, foram testados vários biopolímeros e agentes de acabamento comerciais, sendo que a maioria não conseguiu reter as propriedades de revestimento e de cor. A exceção foi o Sylgard™ 184, um agente comercial à base de silicone, que conseguiu manter a cor, o brilho e a iridescência após testes de lavagem. A mistura de PCs e a influência da cor do substrato quando combinada com PCs não tingidos/tingidos também foram estudadas. Ambos os estudos mostraram que os PCs seguem o princípio da adição de cor, onde a cor do corante se sobrepõe à cor estrutural quando a sua concentração é superior a 1% em peso. Com este projeto de investigação foi desenvolvido um método de coloração alternativo e mais sustentável, visando a sua aplicação em têxteis técnicos de alta visibilidade para segmentos de vestuário de trabalho e/ou desportivo.por
dc.description.sponsorshipFundação para a Ciência e Tecnologia (SFRH/BD/145269/2019)
dc.identifier.tid101656610
dc.identifier.urihttps://hdl.handle.net/1822/102877
dc.language.isoeng
dc.relationDevelopment of structural colors, assisted by plasma technology and biopolymer coating, for high visibility technical fabrics [SFRH/BD/145269/2019]
dc.rightsopenAccess
dc.rights.urihttp://creativecommons.org/licenses/by-nc-nd/4.0/
dc.subjectStructural color
dc.subjectPhotonic crystals
dc.subjectIridescence
dc.subjectBiopolymer
dc.subjectSensor
dc.subjectPlasma radiation
dc.subjectCor estrutural
dc.subjectCristais fotónicos
dc.subjectIridescência
dc.subjectBiopolímero
dc.subjectRadiação plasmática
dc.subject.fosEngenharia e Tecnologia::Engenharia dos Materiais
dc.titleDevelopment of structural colors, assisted by plasma technology and biopolymer coating, for high visibility technical fabricseng
dc.title.alternativeDesenvolvimento de cores estruturais, auxiliado pela tecnologia de plasma e revestimento de biopolímeros, para têxteis técnicos de alta visibilidadepor
dc.typedoctoralThesis
dspace.entity.typePublication
oaire.awardNumberSFRH/BD/145269/2019
oaire.awardTitleDevelopment of structural colors, assisted by plasma technology and biopolymer coating, for high visibility technical fabrics [SFRH/BD/145269/2019]
oaire.awardURIhttps://hdl.handle.net/1822/97505
oaire.funderIdentifierhttp://doi.org/10.13039/501100001871
oaire.funderNameFundação para a Ciência e a Tecnologia, I.P.
relation.isProjectOfPublication1e645a42-88f1-4965-9967-8f6f841eca5f
relation.isProjectOfPublication.latestForDiscovery1e645a42-88f1-4965-9967-8f6f841eca5f
sdum.degree.gradeMuito bom
sdum.uoeiEscola de Engenharia
thesis.degree.grantorUniversidade do Minhopor
thesis.degree.nameDoutoramento em Engenharia Têxtil

Ficheiros

Pacote original

A mostrar 1 - 1 de 1
A carregar...
Nome:
Rui Daniel Vilaca Fernandes.pdf
Tamanho:
53.78 MB
Formato:
Adobe Portable Document Format