Shear strengthening of damaged reinforced concrete beams with hybrid composite plates

dc.contributor.authorBaghi, Hadipor
dc.contributor.authorBarros, Joaquim A. O.por
dc.contributor.authorRezazadeh, Mohammadalipor
dc.date.accessioned2017-12-12T17:25:03Z
dc.date.available2019-11-01T07:00:13Z
dc.date.issued2017-10
dc.date.submitted2016-08
dc.description.abstractThis paper aims to evaluate experimentally the potentialities of Hybrid Composite Plates (HCPs) technique for the shear strengthening and repairing of reinforced concrete (RC) beams. HCP is a thin plate of Strain Hardening Cementitious Composite (SHCC) reinforced with Carbon Fiber Reinforced Polymer (CFRP) laminates. For this purpose, an experimental program composed of four Rectangular and five T-cross section beams was executed to assess the strengthening efficiency of HCPs technique. There were two control beams without any type of shear reinforcement, and seven beams strengthened with HCPs. The HCPs were applied to the lateral faces of the beams by using a combination of epoxy adhesive and mechanical anchors. The bolts were applied with a certain torque in order to increase the concrete confinement. To have a better understanding of the shear behavior of SHCC material, Iosipescu shear tests were carried out, and the results were used to derive their fracture mode II parameters. To further explore the potentialities of the HCPs technique for the shear strengthening, the experimental tests were simulated numerically by a FEM-based computer program considering the material properties obtained experimentally. After demonstration of the good predictive performance of the numerical model, a parametric study was executed to investigate the influence of some parameters on the load carrying capacity of the strengthened beams, namely: i) Use a mortar instead of the SHCC; ii) application of different applied torque level to the mechanical anchors; iii) different bond condition between HCPs and concrete substrate.por
dc.description.publicationversioninfo:eu-repo/semantics/publishedVersionpor
dc.description.sponsorshipClever Reinforcement Iberica for providing the CFRP laminates and epoxy, Sika for the sand and adhesive, Grace for the superplasticizers, Dow Chemical Co. for viscous modifying agents, ENDESA Compostilla power station for the fly ash, and Casais for assisting in the execution of the beams. FCTpor
dc.distributioninternationalpor
dc.identifier.citationBaghi, H., Barros, J. A., & Rezazadeh, M. (2017). Shear strengthening of damaged reinforced concrete beams with Hybrid Composite Plates. Composite Structures, 178, 353-371por
dc.identifier.doi10.1016/j.compstruct.2017.07.039por
dc.identifier.issn0263-8223por
dc.identifier.urihttps://hdl.handle.net/1822/48232
dc.language.isoengpor
dc.peerreviewedyespor
dc.publisherElsevierpor
dc.relation.publisherversionhttps://www.sciencedirect.com/science/article/pii/S0263822316315951por
dc.rightsopenAccesspor
dc.subjectStrain Hardening Cementitious Compositespor
dc.subjectNear Surface Mountedpor
dc.subjectCFRP laminatespor
dc.subjectShear Strengtheningpor
dc.subjectIosipescu Shear Testpor
dc.subjectFinite Element Methodpor
dc.subjectlosipescu shear testpor
dc.subject.fosEngenharia e Tecnologia::Engenharia Civilpor
dc.subject.wosScience & Technologypor
dc.titleShear strengthening of damaged reinforced concrete beams with hybrid composite platespor
dc.typearticle
dspace.entity.typePublicationen
oaire.citationEndPage371por
oaire.citationStartPage353por
oaire.citationVolume178por
sdum.journalComposite Structurespor

Ficheiros

Pacote original

A mostrar 1 - 1 de 1
A carregar...
Nome:
IJ(ISI)_150.pdf
Tamanho:
2.05 MB
Formato:
Adobe Portable Document Format