Performance of waste based alkaline mortars submitted to accelerated carbon dioxide curing

dc.commentshttp://ctac.uminho.pt/node/2575por
dc.contributor.authorMastali, Mohammadpor
dc.contributor.authorAbdollahnejad, Zahrapor
dc.contributor.authorPacheco-Torgal, F.por
dc.date.accessioned2017-10-20T08:21:20Z
dc.date.issued2018
dc.date.submitted2017-06
dc.date.updated2017-10-19T16:51:39Z
dc.description.abstractCarbon dioxide sequestration is crucial for targets limiting global warming could be achieved. This paper discloses results of an investigation concerning the performance of fly ash/waste glass alkaline-based mortars with two additives and recycled aggregates exposed to accelerated carbon dioxide curing. Mechanical properties as well as water absorption, drying shrinkage and carbon sequestration potential were studied on it. The results show that the mixtures with calcium hydroxide and sodium hydroxide concentration of 8M leads to the highest compressive strength (10 MPa) which is high enough for the production of masonry blocks. Significant correlations between the flexural strength and the compressive strength were noticed. The mixtures show a low water absorption by immersion (9%) as well as by capillary (1.4 kg/m2.H0.5). The results of the modulus of elasticity show that increasing the sodium hydroxide molarity increased the stiffness of the mixtures. The results of drying shrinkage are in line with the results of the capillary water absorption and of the elastic modulus. A maximum CO2 sequestration (164 kgCO2eq/m3) is noticed for the mixture with a sodium concentration of 8 M based on the additive calcium hydroxide.por
dc.description.publicationversioninfo:eu-repo/semantics/publishedVersionpor
dc.description.sponsorshipThe authors would like to acknowledge the financial support of the Foundation for Science and Technology (FCT) in the frame of project IF/00706/2014-UM.2.15.por
dc.distributioninternationalpor
dc.identifier.citationMastali M., Abdollahnejad Z., Pacheco-Torgal F. Performance of waste based alkaline mortars submitted to accelerated carbon dioxide curing, Resources, Conservation and Recycling, Vol. 129, pp. 12-19, doi: 10.1016/j.resconrec.2017.10.017, 2018.por
dc.identifier.doi10.1016/j.resconrec.2017.10.017por
dc.identifier.issn0921-3449por
dc.identifier.urihttps://hdl.handle.net/1822/46722
dc.language.isoengpor
dc.peerreviewedyespor
dc.publisherElsevierpor
dc.rightsopenAccess
dc.subjectAlkali-activated mortarspor
dc.subjectCarbon dioxide curingpor
dc.subjectCarbon sequestrationpor
dc.subjectCompressive strengthpor
dc.subjectFly ashpor
dc.subjectWaste glasspor
dc.subjectCarbon dioxide sequestrationpor
dc.subjectElastic moduluspor
dc.subjectDrying shrinkagepor
dc.subject.wosScience & Technologypor
dc.titlePerformance of waste based alkaline mortars submitted to accelerated carbon dioxide curingpor
dc.typearticle
dspace.entity.typePublicationen
oaire.citationEndPage19por
oaire.citationStartPage12por
oaire.citationTitleResources, Conservation and Recycling
oaire.citationVolume129por
sdum.journalResources, Conservation and Recyclingpor

Ficheiros

Pacote original

A mostrar 1 - 1 de 1
A carregar...
Nome:
2575-Mastali et al. 2017.pdf
Tamanho:
1.25 MB
Formato:
Adobe Portable Document Format