Experimental validation of a three-port integrated topology to interface electric vehicles and renewables with the electrical grid

dc.contributor.authorMonteiro, Vítor Duarte Fernandespor
dc.contributor.authorPinto, J. G.por
dc.contributor.authorAfonso, João L.por
dc.date.accessioned2019-02-08T11:25:56Z
dc.date.available2019-02-08T11:25:56Z
dc.date.issued2018-06
dc.description.abstractThis paper presents the analysis and the experimental validation of an off-board three-port integrated topology (TPIT) used to interface electric vehicles (EVs) and renewables from solar photovoltaic (PV) panels with the electrical power grid. The TPIT is composed by three power converters sharing a single common dc-link, and it can operate in four different modes towards the future smart grids: (1) The EV batteries are charged with energy from the electrical power grid through the grid-to-vehicle (G2V) operation mode; (2) The EV batteries deliver part of the stored energy back to the power grid through the vehicle-to-grid (V2G) operation mode; (3) The energy produced by the PV panels is delivered to the electrical grid through the renewable-to-grid (R2G) operation mode; (4) The energy produced by the PV panels is used to charge the EV batteries through the renewable-to-vehicle (R2V) operation mode. In addition to individual action, the reorganization of these modes results in new combined operation modes. The paper presents the proposed power theory to control the TPIT, the current control strategies to manage the currents in ac and dc sides of the TPIT, and the details of the developed TPIT prototype, including the hardware and the digital control system. Experimental results that validate the TPIT operation modes are also presented.por
dc.description.publicationversioninfo:eu-repo/semantics/publishedVersionpor
dc.description.sponsorshipThis work has been supported by FCT – Fundação para a Ciência e Tecnologia in the scope of the project: PEstUID/CEC/00319/2013. This work has been supported by COMPETE: POCI-01-0145-FEDER-007043 and FCT – Fundação para a Ciência e Tecnologia within the Project Scope: UID/CEC/00319/2013. This work is financed by the ERDF – European Regional Development Fund through the Operational Programme for Competitiveness and Internationalisation ‐ COMPETE 2020 Programme, and by National Funds through the Portuguese funding agency, FCT ‐ Fundação para a Ciência e a Tecnologia, within project SAICTPAC/0004/2015‐ POCI‐ 01‐0145‐FEDER‐016434.por
dc.distributioninternationalpor
dc.identifier.doi10.1109/TII.2018.2818174por
dc.identifier.issn1551-3203
dc.identifier.urihttps://hdl.handle.net/1822/59007
dc.language.isoengpor
dc.peerreviewedyespor
dc.publisherIEEEpor
dc.relationinfo:eu-repo/grantAgreement/FCT/5876/147280/PTpor
dc.relationSAICTPAC/0004/2015por
dc.rightsopenAccesspor
dc.subjectElectric Vehiclepor
dc.subjectIntegrated Topologypor
dc.subjectPower Converterspor
dc.subjectRenewablespor
dc.subjectSmart Gridpor
dc.subjectElectric vehicle (EV)por
dc.subject.fosEngenharia e Tecnologia::Engenharia Eletrotécnica, Eletrónica e Informáticapor
dc.subject.wosScience & Technologypor
dc.titleExperimental validation of a three-port integrated topology to interface electric vehicles and renewables with the electrical gridpor
dc.typearticlepor
dspace.entity.typePublicationen
oaire.citationEndPage2374por
oaire.citationIssue6por
oaire.citationStartPage2364por
oaire.citationVolume14por
sdum.journalIeee Transactions on Industrial Informaticspor

Ficheiros

Pacote original

A mostrar 1 - 1 de 1
A carregar...
Nome:
IEEE_TII_EV_RES_2018.pdf
Tamanho:
491.45 KB
Formato:
Adobe Portable Document Format