Bulk-micromachined tunable fabry–perot microinterferometer for the visible spectral range

dc.contributor.authorCorreia, J. H.
dc.contributor.authorBartek, M.
dc.contributor.authorWolffenbuttel, R. F.
dc.date.accessioned2005-12-28T11:38:21Z
dc.date.available2005-12-28T11:38:21Z
dc.date.issued1999
dc.description.abstractThe design, fabrication and measured characteristics of a bulk-micromachined tunable Fabry–Perot microinterferometer (FPMI) for the visible spectral range are presented. The FPMI is formed by two parallel 40 nm thick silver mirrors supported by a 300 nm low tensile stress silicon nitride membrane with a square aperture (side length of 2 mm) and initial cavity gap of 1.2 µm. One of the mirrors is fixed, the other is under tension on a movable Si frame, which is electrostatically deflected, using several distributed electrodes, to control cavity spacing and mirror parallelism. Performance achieved is: high flatness of the mirrors (λ/10 for the visible part of the spectrum), low control voltages (<21 V for 450 nm deflection) and simple fabrication.eng
dc.description.sponsorshipFundação para a Ciência e Tecnologia (FCT)eng
dc.distributioninternationaleng
dc.identifier.citation"Sensors and actuators A : Physical". ISSN 0924-4247. 76 (1999) 191-196.eng
dc.identifier.issn0924-4247eng
dc.identifier.urihttps://hdl.handle.net/1822/3775
dc.language.isoengeng
dc.peerreviewedyeseng
dc.publisherElseviereng
dc.rightsopenAccesseng
dc.subjectInterferometer Fabry–Peroteng
dc.subjectSpectrometereng
dc.subjectFWHMeng
dc.subjectFinesseeng
dc.titleBulk-micromachined tunable fabry–perot microinterferometer for the visible spectral rangeeng
dc.typearticlepor
dspace.entity.typePublicationen
sdum.journalSensors and Actuators A: Physicalpor
sdum.pagination191-196eng
sdum.publicationstatuspublishedeng
sdum.volume76eng

Ficheiros

Pacote original

A mostrar 1 - 1 de 1
A carregar...
Nome:
artigo3.pdf
Tamanho:
932 KB
Formato:
Adobe Portable Document Format
Descrição:
Documento principal