Shrinkage and ejection forces in injection moulded products
| dc.contributor.author | Pontes, A. J. | |
| dc.date.accessioned | 2003-11-04T15:06:20Z | |
| dc.date.available | 2003-11-04T15:06:20Z | |
| dc.date.issued | 2002 | |
| dc.description.abstract | The development and manufacture of injection moulds for high quality technical parts is a complex task implying an integrated knowledge of the injection moulding process and the material changes undergone during processing. In the case of the design of moulds with deep cores (e.g. for piping accessories), the prediction of the mould dimensions in order to obtain parts with the correct size and shape after moulding, and the prediction of the forces required for the ejection of the mouldings, are two important task. In this work the shrinkage and the ejection force are studied in injection moulding samples. Two types of mouldings are produced: a edge gated rectangular plate and a spider gated cylindrical tube. To produce the spider gated tube an instrumented mould was designed and manufactured. The mould has the means to measure the pressure and temperature histories, and the force evolution during the ejection process. The monitoring of the variables is done in real processing conditions and time. For the tube mouldings only, the force evolution during the ejection was measured. Two materials were used for the mouldings: a polycarbonate and an isotatic polypropylene, as paradigms of amorphous and semi-crystalline materials. The strain gauge technique was used to monitor the shrinkage variation during moulding cycle and proved to be very useful to address the effect of constraint in the shrinkage and to measure the onset of shrinkage. The recorded pressure and temperature during the processing are analysed and compared with simulations performed using a commercial software C-Mold v. 99.7, and a open code UNISA developed at the Università di Salerno. The experimental data are qualitatively in agreement with those predicted by the softwares. However some discrepancies can be observed when the effect of pressure on viscosity and mould deformation are not considered. The as-moulded shrinkage is analysed and compared with simulations performed using the C-Mold v. 99.7 and a thermo-mechanical model originally developed at the Università di Salerno and modified within this research to suit specific aspects of the geometries being studied. This thermo-mechanical model gives a satisfactory description of the shrinkage and shows the relevance of using the degree of crystallinity as criterion of solidification. The ejection force is well described by a thermo-mechanical model accounting for crystallinity effects and the shrinkage evolution developed in this work. | eng |
| dc.description.sponsorship | Fundação Calouste Gulbenkian; Instituto de Cooperação Científica e Tecnológica; IC - PME Programme. | eng |
| dc.identifier.uri | https://hdl.handle.net/1822/173 | |
| dc.language.iso | eng | |
| dc.rights | openAccess | eng |
| dc.title | Shrinkage and ejection forces in injection moulded products | eng |
| dc.type | doctoralThesis | eng |
| dspace.entity.type | Publication | en |
Ficheiros
Pacote original
1 - 1 de 1
A carregar...
- Nome:
- AJPONTES_thesis.pdf
- Tamanho:
- 2.76 MB
- Formato:
- Adobe Portable Document Format